Backgauges Available for PC800

G24 Series

 

G24 Model A
Model A
Holding Force 200 lbs.
# of Drives 1
Weight 200 lbs.
Overall Height 26˝
Overall Depth 42˝
Overall Width 16˝
Gauge Bar Length
Positioning Speed 600 IPM
Gauge Travel 24˝
Repeatability ± .002˝
Vertical Height Adjustment 10˝
Recommended Width Up to 4´

 

The A compact gauge for press brakes with 12˝ to 42˝ between sideframes. This unit is available with a 3´ gauge bar for light applications.

 

G24 Model B
Model B
Holding Force 400 lbs.
# of Drives 2
Weight 300 lbs.
Overall Height 26˝
Overall Depth 42˝
Overall Width 40˝
Gauge Bar Length
Positioning Speed 600 IPM
Gauge Travel 24˝
Repeatability ± .002˝
Vertical Height Adjustment 10˝
Recommended Pressbrake Sideframe Width 5´ to 8´6˝

 

The B is Automec’s most popular model. Ideal for pressbrakes with up to 8´6˝ between the sideframes.

 

G24 Model BP
Model BP or HDP
Holding Force 400 lbs.
# of Drives 2
Weight 300 lbs.
Overall Height 26˝
Overall Depth 42˝
Overall Width 40˝
Gauge Bar Length
Positioning Speed 600 IPM
Gauge Travel 24˝
Repeatability ± .002˝
Vertical Height Adjustment 10˝
Recommended Pressbrake Sideframe Width 5´ to 8´6˝

 

The P models are required for Amada, Promecam, and other brakes in which the rear bed clearance is less than 7˝. This low-profile backgauge bolts right to the die rail.

 

G24 Model HD
Model HD
Holding Force 400 lbs.
# of Drives 2
Weight 300 lbs.
Overall Height 26˝
Overall Depth 42˝
Overall Width 77˝
Gauge Bar Length 11´
Positioning Speed 600 IPM
Gauge Travel 24˝
Repeatability ± .002˝
Vertical Height Adjustment 10˝
Recommended Pressbrake Sideframe Width 9´ to 14´

 

The HD heavy-duty offers more rigidity for larger pressbrakes or when progressive die set-ups are used.

 

G24 Model TD
Model TD
Holding Force 600 lbs.
# of Drives 3
Weight 450 lbs.
Overall Height 26˝
Overall Depth 42˝
Overall Width 148˝
Gauge Bar Length 18´
Positioning Speed 600 IPM
Gauge Travel 24˝
Repeatability ± .002˝
Vertical Height Adjustment 10˝
Recommended Pressbrake Sideframe Width over 14´

 

The TD has 3 drive screws with the center drive flanked by 2 drives 6´ away on each side. Designed for large bed pressbrakes.

G48

 

G48 Model
Model G48HD or G48TD
Holding Force 400 lbs.
# of Drives 2
Weight 590 lbs.
Overall Height 32˝
Overall Depth 75˝
Overall Width 84˝
Gauge Bar Length 11´
Positioning Speed 600 IPM
Gauge Travel 49˝
Repeatability ± .002˝
Vertical Height Adjustment 12˝
Recommended Width 96˝ to 144˝

 

The G48 plate gauge is designed for heavy forming operations offering significant productivity improvments when handling larger, heavier workpieces.