AMADA PROMECAM HYDRAULIC PRESS BREAK MANUAL GENERAL INTRODUCTION

This document is designed to facilitate the handling, placing operations and connection to the electricity and compressed air supply networks of your ITS or ITPS hydraulic press brake (Figure 1.1).

This publication covers the following models:

AMADA ITS 50/12
AMADA ITS 50/20
AMADA ITS 80/25
AMADA ITS 103
AMADA ITS 125/30

amada promecam

List of available versions:

On ITS 50/12
Type 412 rear thrust block with:
X axis
or
X axis + R1, R2

On ITS 50/20, 80/25, 103, 125/30
Type 600 rear thrust block with:
– axis X
or
– axis X + R1 ; R2
or
X axis + R1, R2 + 21,22

Table of Machine Characteristics

DESIGNATION Unites 50/12 50/20 80/25 103 125/3
NOMINAL POWER KN 10 8 20 18 18
DISJUNCTION KN 2250 2000 2500 3000 3100
MAX BENDING LENGTH mm 1200 2000 2500 3000 3100
TABLE LENGTH mm 60 60 60 90 90
TABLE WIDTH mm 960 960 960 960 960
WORKING TOP HEIGHT mm 370 370 370 370 370
STROKE mm 100 100 100 100 100
GOOSE NECK mm 400 400 400 400 400
SIDE PLATE ENTRY mm 1020 1690 2160 2600 2600
MAXI PRESSURE M.Pa 31,5 31,5 25,2 51,5 26,3
NB. OF CYLINDERS 1 1 2 2 3
OIL CAPACITY Liters 45 45 70 85 110
50 160 Hz INST. POWER Kw 6,5 6,5 9,5 11 13
INST. POWER Kw 4,5 4,5 7,5 9 11
50 Hz APPROX. SPEED mm/s 85 85 85 85 85
60 Hz APPROX. SPEED mm/s 82 82 82 82 82
50/60 Hz WORKING SPEED mm/s 10 10 10 10 10
50/60 Hz RETURN SPEED mm/s 80 80 80 80 80
No. OF CYCLES 4 4 4 4 4
OVERALL HEIGHT mm 2030 2180 2200 2325 2400
OVERALL LENGTH mm 1700 2500 2860 3300 3300
OVERALL WIDTH mm 1745 1745 1880 1930 1940
WEIGHT Kg 2600 3300 4600 6000 7200
WEIGHT GAUGE Kg 175 330 410 430 430
No.OF ADJUST. INTERS 6 10 13 15 15
ADJUSTABLE INTERS mm 120 120 120 120
TOOLS
Width: 835 1 2 3 4 4
Width: 415 1 1

CONTINUE TO 2 – Amada Press Brake Safety Guidelines

BACK TO AMADA PROMECAM HYDRAULIC PRESS BRAKE TECHNICAL MANUAL

Download the full Amada Promecam ITS Hydraulic Press Brake 45899 Manual

 

About Automec, Inc.

If you are having issues with your Press Brake and need a Backgauge Control Upgrade Kit you have come to the right place.  Automec is the industry leader in Retrofitting Pressbrakes and Shears.

Our positioning systems consist of a programmable control where the operator enters a dimension and a motorized gauging mechanism automatically moves through a sequence of programmed dimensions. These systems can be retrofitted to press brakes, shears, cut-off saws and punches.

Whether you need a press brake retrofit or a new press brakecontact us at (781) 893-3403 for help.