(Download programming Amada Promecam press brake ITS)

17 -1 PROGRAMMING OF A PART

programming of a part

programming - fig. 1

programming - fig 2

programming - fig 3

17 – 2 PROGRAMMING OF BENDS

Programming bends 1In the case of a 3-axis MB3 numerical control, program the dimension of the R axis or the Z axis, using:Key Aux

programming-bends 2

programming bends fig 4

programming-bends-figure 5

programming bends figure 6

17 ·3 FINDING PINCH DIMENSION

 

17 – 3 – 1 IN MANUAL MODE

Position of switches on electrical control compartment

in manual mode 1

resetting, green indicator light is on

in manual mode 2

proceed in the same manner if the program has other bends.

in-manual-mode fig 7

in-manual-mode fig 8

in-manual-mode fig 9

17 – 3 – 2 IN PROGRAMMING MODE

in-programming mode 1

 

in-programming mode fig 10in-programming mode fig 11

in-programming mode fig 12in-programming mode fig 13

 

17 – 4 FINDING BENDING DEPTH VALUE

finding bending depth value

 

Position of switches on electrical control compartment

resetting, green indicator light is on

finding bending depth value 2

FINDING BENDING DEPTH VALUE fig 14

FINDING BENDING DEPTH VALUE fig 15

FINDING BENDING DEPTH VALUE fig 16

17 – 4 – 1 IN MANUAL MODE

17-4-1 in manual mode 17-4-1 in manual mode fig 1717-4-1 in manual mode fig 1817-4-1 in manual mode 2

17-4-1 in manual mode fig 19

17-4-1 in manual mode fig 20

17-4-1 in manual mode fig 21

1 7 – 4 – 2 IN PROGRAMMING MODE

Programming mode

programming mode fig 22

programming mode fig 23

17 – 5 PRODUCTION

Position of switches on electrical control cabinet

Production

resetting, green indicator light is on

production 2

You can now make the first bend.

After making the first bend, the numerical control is automatically placed on next bend. Always wait for the end-of-positioning beep before pressing the pedal again.

BACK TO AMADA PROMECAM HYDRAULIC PRESS BRAKE TECHNICAL MANUAL

Back to 16) – Amada Promecam numerical control customization

Continue to 18) – Amada Promecam ROUTINE MAINTENANCE OPERATIONS

Download the full Amada Promecam ITS Hydraulic Press Brake 45899 Manual

About Automec, Inc.

If you are having issues with your Press Brake and need a Backgauge Control Upgrade Kit you have come to the right place.  Automec is the industry leader in Retrofitting Pressbrakes and Shears.

Our positioning systems consist of a programmable control where the operator enters a dimension and a motorized gauging mechanism automatically moves through a sequence of programmed dimensions. These systems can be retrofitted to press brakes, shears, cut-off saws and punches.

Whether you need a press brake retrofit or a new press brakecontact us at (781) 893-3403 for help.

Search

Products

Contact Us

Scroll to Top